I made some progress over the past few days on the Amati American gunboat kit, but it doesn’t really show very well. Here are photos from my last post and then from today.
It may not look much different, but there are some 116 parts that have been added since last time! That comes out to be 56 cleats and 60 ringbolts. The ringbolts had to be assembled from provided eyebolts and split rings. The cleats are cast metal and I’d already painted them months ago.
Last time, if you recall, I said there were a lot of extra cleats and eyebolts. Turns out I was absolutely wrong. I went over the plans and instructions thoroughly, and I discovered that just about every one of these cleats and ringbolts has a line attached to it, so there is a LOT more rigging on this model than it first appears in the kit photos. Don’t be fooled.
Amati Model of Italy makes a wide variety of interesting ship modelings subjects. In early 2018, I finished building their Swedish Gunboat kit. Like that one, another gunboat that has been around for as long as I can remember, and was always intrigued by, is the “Arrow” an American Gunboat from the period around the War of 1812.
The Jeffersonian era was an interesting time in American naval history in the desire to use defensive gunboats in place of large expensive warships. As a result, there were numerous gunboat designs implemented. In Howard Chapelle’s book, The History of the American Sailing Navy, several of these designs can be found. Among them is a design that Chapelle describes as a “galley gunboat showing Mediterranean influence.” Clearly, this was the drawing that inspired the Arrow gunboat kit.