Being primarily a ship modeler, I set this project aside for a while. Part of the problem was that I’d discovered that I was missing one small set 4 parts, all the same. There are a lot of parts in this kit and they are well packaged and labeled, but it took a while to go through and check and re-check and then to figure out exactly how the part was shaped and how it fit on the model.
The pieces are parts of the lower roof and cover the corner joints. Outwardly, they just look like simple wood strips, but they need to be groved on the underside in order to sit down on those corner joints. Also, they need to be thicker than the other roof boards to allow for the groove.
With the construction of the base of the temple completed, I proceeded to paint the completed assembly using smokey beige satin-finish Rust-Oleum Ultra Cover spray paint. I also decided to go forward with construction of the mounting base. This was actually from Step 27 in the instructions, but I had the parts out and didn’t see any reason not to go ahead with this assembly.
The base of the pagoda painted a stoney gray color. If I wanted to get more authentic, I would have painted it earlier in construction and masked off areas to create different shading for the different stone blocks.
The first stage of construction is the stone base of the structure. Being a wooden kit, this is of course made from wood. The parts are perfectly milled, so there’s no cutting or sanding involved, just aligning and gluing.
I didn’t glue the Square insert into place yet, as it’s not added until Step 2, but I dropped it into place to help with the alignment. As it turns out, it’s not helpful, as it fits a bit loosely, and my cutting pad has a printed grid that allows me to check the corner angles.
By the way, I really like the ModelCraft cutting mats. The one I’m using here is an A4 size. That’s roughly 12″ x 8″, which I bought from the ModelCraft Tools USA, which is run by Ages of Sail. In fact you can just buy it from their website too. I really like these cutting mats. This one was only $13.99 plus tax and shipping.
So, it begins! I got this kit from Zootoyz.jp earlier in the year, along with some other temple and Edo period architecture kits. One of those kits, the Shinmei-zukuri Shrine, I built and wrote about here. But, I’ve had too many other projects to work on to get to any of these other kits.
Well, it’s been long enough. We’re approaching the end of the year, when I traditionally build some kind of simpler Japanese kits. Since I made a promise to get to this kit, specifically, I’m pulling the kit out of the closet and setting it out to build.
Hōryū-ji 5-Story Pagoda from Woody Joe
This will make a nice size model, measuring about 18.5″ tall on a 10-1/4″ square base when done. There are more than 870 parts, mostly milled wood, though there are some wood strips and smaller laser-cut sheets. The kit is listed by Woody Joe as requiring 50 hours to build. I think this may be a revision of an early figure of 40 hours to build, as that’s what I recall and that’s what Zootoyz.jp states. In any case, it will take a lot less time than a ship model.
This week was like Christmas here, as a shipment of Japanese wooden model kits arrived from Zootoyz, my recommended Japanese online hobby dealer. Four model kits came, and none of them are ship model kits. I decided I needed some nice gift ideas, so I found a number of Woody Joe kits that I can build and present as gifts to my Japanese music teacher, and my family and friends.
I have a lot of ship modeling projects to work on, so I don’t expect to spend a lot of time working on these right away. But, half of these are very simple mini-architectural kits that Woody Joe lists as taking about 8 hours to complete. Perfect for a small weekend distraction!
Teahouse Mini-Architecture Kit