It’s been a while since I posted about the Amati American gunboat “Arrow”. As you can see in the photo below, I have the model mounted on a cherry wood base that I cut and routed the edge.This photo is from a ship model meeting back in March of this year, and shows the sails installed with the final rigging lines going in.
Unfortunately, I am not one to leave well enough alone. The kit plans show two reef bands on each sail. Also, the sails turned out a bit small for the lateen yards. Finally, I didn’t like the run of the brails, the ropes used to haul the edge of the sail in and up into the lateen yard.
Ship Modeler 