Daily Archives: February 10, 2022

February 9, 2022

Rigging the Amati Arrow Gunboat

I have to be honest. Aside from the Bremen Cog model that I completed about a year ago, I haven’t really done much rigging. My heart just hasn’t been into it. I’ve always loved researching model subjects and hull construction and detailing. But, when it comes to belaying lines to cleats and seizing lines around blocks and all, my mind just gets tangled in all the ropes.

With Japanese boat models, there’s very little of that, and maybe that’s why I’ve done so much work on them over the past few years. But, now I’m at the rigging stage of my Amati Arrow Gunboat kit. I thought, given the size and type of boat, that rigging would be pretty simple. But, it’s far more complicated than I would have ever expected.

It seems that just about every line on this model, save for a bobstay at the bow, is running rigging. Which means that all the lines have to get belayed somewhere. But, the model has 54 cleats, and from what I can tell, all but about 6 will need to be used.

This past week, I’ve just been working on rigging the backstays that support the masts, and that alone uses 24 cleats. I managed to get a little over half way through this task, before it wore me out.

I suppose I’ve become something of a rigging wimp…

 

Meanwhile, the Atakebune

While rigging may be getting me down a bit this week, I seem to be taking modifications of the Atakebunbe model, the Japanese 16th century battleship, in stride. I’ve gone ahead and removed the stern section of the box structure. Luckily, I’ve been using Original Titebond wood glue, which can be soften by soaking with water. So, this actually didn’t take a great deal of work, and I managed to free up most of the parts without breaking anything.

Meanwhile, I’m working on the roofing of the castle structure. Below, you can see the rounded roof that was included in the kit, which no longer spans the length of the extended structure. More on these later.

And, so that you can see how much of the castle structure is now done, here’s a pic of that.

 

A Little Sick

Now, I would probably have made more progress on the Atakebune model if it weren’t for the fact that I came down with stomach cramps and unpleasant other attendant symptoms last night, which continued today. It’s not actually that bad, but periodically painful and otherwise unpleasant.

Handed Down Projects

On a completely unrelated note, I wanted to mention that back in 2013, a ship modeling friend and colleague passed along two of his larger projects to me shortly before he succumbed to cancer. He hadn’t gotten very far along on either one, and I’ve kept them in storage for the time being.

The ship modeler’s name was John Nash, and he passed away on October 13, 2013. He was a member of both the Hyde Street Pier Model Shipwrights, as well as the South Bay Model Shipwrights, and he was always very supportive of my ship modeling work and skills. I always figured that if I completed the models, it would really be a join project between him and me, and it gives me a way to remember and honor him.

It’s hard to imagine it’s been more than 8 years. But, I finally got myself organized to get his kits out again. Last year, I did a little bit of cleanup on one of them. Then, last month, I decided to redo some of the hull planking, which was only barely started and to reshape the bow blocks. The kit is Mantua Panart’s Spanish warship San Felipe, one of their most popular, large kits.

I haven’t done much to the model. Just took off the lower two planking strakes at the bow and started filing the bow block, which were left too bluff. I’ll also need to bevel the bulkheads and possibly add some kind of support or filler blocks between them. In the meantime, I covered the stem with tape to help protect it from stray bumps with the file.

Now the fact hasn’t been lost on me that this is a full-rigged ship with lots of shrouds and ratlines, and I just got through complaining about rigging. However, I’ve rigged a San Felipe model before and quite enjoyed it.

Anyway, who knows? I’m not trying to finish it, just to work on it in my spare time. It’s a potentially beautiful model when properly built. But, yes, I understand that the history of this ship is questionable. There’s a good post about it here: https://www.modelships.de/San_Felipe_1690_authenticity/San_Felipe_1690_authenticity.htm

At this point in life, I don’t really care about the accuracy of historic details. This kit makes a beautiful model. What’s more, it’s the original kit, before the manufacturer started pre-printing deck planking and all.

I found a photo on the Internet of a completed model that was posted on ModelShipWorld.com. Interestingly enough, I know the builder, Andy Poulo. He’s one of the people who attended many of the first ship model meetings I set up at the Vallejo Naval and Historical Museum starting in 2013.

Anyway, I’ll post more about this project over time.

 

Ship Model Meetings

Having just mentioned the museum in Vallejo, last week I contact the museum’s new Director and cleared the way to hold some ship model meetings again there. I started some meetings back in 2013, with our last one in 2019. I think it’s time to see what the old gang is up to now. Sadly, we lost one member a couple years ago, and I’m beginning to think that Andy Poulo, may also be gone. Still, it’s important to try to reconnect with those who are here, and I know at least three of us are still building ship models.

Also, with Hyde Street Pier Model Shipwrights still not meeting in person, it may lead some new ship modelers to join my ship model meeting in Vallejo. It’s always nice when there are at least 5 or 6 active ship modelers. Ω