Here it is, about a month after I said I should have the model done in about a week. HMS Alert, my first paper model project is finally done. I added the last of the rope coils last night and and working on the case.
This is from the Shipyard line of kits from the Polish company called Vessel. The kits are sold in the U.S. by Ages of Sail (http://www.agesofsail.com). The hull and nearly all the deck details are cut from pre-printed paper parts provided in the kit. Some things, like the mast and spars and blocks are wood, purchased separately.
The sails are cloth, and the cannons are brass, sold by Syren Ship Model Company as small swivel guns. The blocks are swiss pear blocks that were also sold by Syren (sadly discontinued). Some other aftermarket parts were used, such as the gratings and the gun carriages, which I adapted from a detail kit sold by the Polish company GPM for a different model.
Building this model was a real challenge in patience for me – there are a LOT of little parts to cut, and the instructions take a bit of study, like it’s in code. But overall, I had a blast building it. The kits are VERY inexpensive and if you photocopy the parts before you begin, you can usually recover from basic screw-ups – I certainly had a LOT of opportunity for that!
I highly recommend trying a paper model kit. But not just any kit, I recommend one of the kits from Shipyard. The models are constructed in a fashion that’s closer to wood ship modeling than is true for most other paper kits. These kits are very high quality, but you just need to be aware that you will either have to make just about everything from paper provided in the kit, or you have to provide some of your own materials, like cloth for the sails, dowels for the masts, etc.
If you have a bit more money than time, you should consider getting one of the boxed kits that is part of the Shipyard product line that used to be called Laser Cardboard Kits. These kits contain everything you need in one tidy package. Of course, it’s more money. Also, few part are pre-printed for you. The big advantage is that ALL the parts are laser cut for you – a big time saver. Also, all the boxed ship kits are in a larger 1:72 scale, whereas all the paper ship kits are all 1:96 scale.
This particular model is going to a good home with a fellow ship modeler who has been admiring it since I first brought it to a ship model meeting. He encouraged me to finish it up, and I will be transferring possession of it next week. In the meantime, I’m busy working on a case for the model.
But, this isn’t the last you’ll see of HMS Alert. The new owner and I have made tentative arrangements for me to take it to the Nautical Research Guild conference in October. The model made its first debut at the conference in St. Louis, Missouri, in 2014, so it’s only fitting that it make an official appearance as a completed model in a case this Fall.
I know I’m going to miss working on this paper model. So, I started working on another one that will take it’s place as a low-priority background project. The model is Shipyard’s 1:96 scale HMS Mercury, a 28-gun Enterprize-class sixth rate frigate. At this point, I’m not planning on rigging her. Rather, I’m thinking of making a type of admiralty display model rigged with launch flags. Of course, things change over time, so you never know. Stay tuned! Ω